low level cistern toilet large quantity export

Details show

Application

RENQIU JIUJIE SANITARY WARE CO.,LTD

Renqiu Jijie Sanitary Ware Co., LTD. Is a company that specializes in producing and processing products, and has a complete and scientific quality management system.The company is a large ceramic sanitary fittings and PPR professional manufacturer.We have more than 20 years of experience in production, which is a professional manufacturer.The strict quality control system ensures that every product in the factory meets and exceeds the national standard.Our factory is a real person, we are the basic principle of doing things honestly, we will be the first person, then the business will be the business idea.The product of our factory, in line with the principle of long-term cooperation, pay attention to the product quality, the style follows the tide, meet the demand of the market ceaselessly, keep pace with The Times.The integrity, strength and product quality of ren qiu cleaning co., LTD. Are recognized by the industry.Welcome friends from all walks of life to visit, guide and business negotiations.

  Sample room

 The common failure inspection and treatment methods of toilet water tank fittings are shown in the following table:

1. The water inlet valve is not in water.

2. Check whether the water inlet valve is blocked by debris;

3. Open the inlet valve cover to check whether the sealing ring in the valve body has come off or has a hemp.Iron filings, silt and other debris;

4. Check whether the water inlet valve body is stuck with the wall of the tank, and whether the float is moving freely.Second, the water tank has been filled with water inlet valve still continue to fill 1. Check whether the water pressure is too low (less than 00.05 under the MPAa) or too high (more than 00.8 MPA) 2. Check whether the inlet valve floating body move up and down, will be the tank wall or jammed for him.3. Open the inlet valve cover to check whether the sealing ring in the valve body is stuck or displaced by debris.4. Check that the intake valve is broken Third, the drain valve button or wrench, but drain valve undrained 1. Check whether the drain valve chain is off or too long (2) check button and dislocation according to the water valve Four, drain valve button or wrench, drain valve although drainage single let go after stop drainage 1. Check whether the drain valve chain is off or too long 2. Too much delay whether cups leaking hole 3. Double the size of the file button and drain valve size mismatch Five, implement always has a small leakage phenomenon 1. Check whether implement the tank drain valve installation hole deformation 2. Check whether implement the tank drain valve installation hole surface uneven 3. Check whether the drain valve installation is offset 4. Check the drain valve installation of bottom hook screw or nut are tight

5. Check the drain valve sealing film, sealing surface for impurities or uneven material

6. Check whether the drain valve outlet ontology was

7. Bruised water level if the mediation is too high, higher than that of the overflow tube

8. Check whether the drain valve chain is too short

9. Dual button press bar is too long, down the drain valve